Rapid Hitch

Polished aluminium rack won't rust, chip, or peel. 

Towing capacity - 3400kg GTWR 1-7/8" ball, 3500kg GTWR 50mm ball, 680kg Tongue Weight.   

Quickly adjust height - pull pin, adjust, slip pin back into place. 

Meets V5 and SAE J684 certifications. 

Rapid Hitch Sizing

The Rapid Hitch is available in three drop hitch sizes - the 4" (100mm) drop/rise, the 6" (150mm) drop/rise, and 10" (250mm) drop.

All Rapid Hitch sizes adjust in 1" (26mm) increments.

Fits all 2" (50mm) standard square receivers or 2-1/2" (60mm) Sleeve (part #3800) for use with 2-1/2" square receivers.

A quick and easy way to judge what size drop you need is to measure from the ground up to the inside top of your 2" receiver tube. Use the guidelines below to help you pick the right Rapid Hitch for you. Be aware that the tongue heights of your trailers and the suspension on your truck also play a part in choosing the right hitch, but in most cases these measurements will give you what you need. If you are unsure, please take your truck to your local dealer for advice.

  • If the measurement is 20" or less - the 4" drop is for you.
  • If the measurement is between 20" and 24" you need the 6" drop.
  • If you measure more than 24" you will need the 10" drop.

Multi-Ball Hitch System

The Rapid Hitch multi-ball system is the perfect drop hitch for anyone who tows multiple trailers. You can flip the double ball over, change the drop to a rise, or adjust the height of the drop all by simply removing the hitch pin, making the adjustment, and putting the pin back in place. With these easy height adjustment ball mounts, you can make sure you are keeping your trailer level.

Ball Combinations available - 1-7/8" x 50mm Combo & 1-7/8" x 50mm High Rise Combo.

 All balls are zinc plated steel.

 Lightweight and extremely strong.

 Anti-theft keyed Locking Hitch Pins (part #3492) available.

 

Go to "Shop" for detailed discriptions and prices.

 

EZ Adjust Hitch

The EZ Adjust Hitch is an adjustable ball mount trailer hitch and its adjustability allows you to tow easily and safely by keeping your trailer parallel to the ground, maintaining a more stable towing experience.

The EZ Adjust Hitch is high quality all Steel construction.                      

EZ Adjust Hitch Sizing

The EZ Adjust Hitch is available with 4" (100mm) and 8" (200mm) drop/rise Rack.

Fits all 2" (50mm) standard square receivers or 2-1/2" (60mm) Sleeve (part #3800) for use with 2-1/2" square receivers.

Multi-Ball Hitch System

The EZ Adjust Hitch  multi-ball system is the perfect drop hitch for anyone who tows multiple trailers. You can flip the double ball over, change the drop to a rise, or adjust the height of the drop all by simply removing the hitch pin, making the adjustment, and putting the pin back in place. With these easy height adjustment ball mounts, you can make sure you are keeping your trailer level.

Ball Combinations available - 1-7/8" x 50mm Combo, 1-7/8" x 50mm High Rise Combo & 1-7/8" x 2" Combo.

All balls are zinc plated steel.

Anti-theft keyed Locking Hitch Pins (part #3493) available.

To change the ball height just pull the pin, adjust the height of the ball mount, and slip the pin back into place. That’s it!

 

Go to "Shop" for detailed discriptions and prices.

 

Alumistinger

Andersen Hitches’ often copied but never equaled Alumistinger was the very first aluminum ball mount in the towing industry. With its unique, stand-out appearance the Alumistinger ball mount offers boat, carvan and trailer owners the highest quality and one of the best looking ball mount hitches on the market. The Alumistinger is made of one solid piece of aluminum alloy with no welds, giving it all the strength and durability you need.

 Alumistinger Features - 

Alumistingers

  • 6061 T6 Aluminum alloy (solid bar) construction
  • Available in 2", 4", 6", 8", and 10" drops
  • All Alumistinger sizes can be used in a drop or rise position
  • Fits all 2" standard receivers
  • Couples with 2-1/2" Sleeve (part # 3800) for use in 2-1/2" receivers                              
  • 1" ball shank hole
  • 3500kg GTWR
  • 350kg tongue weight
  • No Paint - No Rust - Forever
  • Meets SAE J684 and V5 certification standards
  • Anti-theft keyed Locking Hitch Pin available (part #3429)

Go to "Shop" for detailed discriptions and prices.

 

Is aluminum really strong enough for use in ball mounts?

The short answer is YES!  When Andersen Manufacturing, Inc. first released the Alumistinger solid aluminum ball mount, many in the industry thought we were doomed to failure. But, after many years and many miles of problem free service the industry had to change its tune. In fact, many companies have released remarkably similar products. When you decide to step up from your rusty steel hitch to the great look of aluminum, remember Alumistinger was first. Insist on the Original!

Aluminium ball mounts will never rust and are much lighter than standard steel ball mounts of similar strength. The aluminum looks great by itself, so there is no need for paint or chrome plating that will chip and peel over time. To keep the shine, you simply need to polish the hitch from time to time, restoring the high gloss surface and making your hitch look brand new.